Certification:

Most models meet or exceed the new “AWEF” requirements for condensing units. Use this guide which collects all of the AWEF numbers for compliant equipment: https://docs.t-rp.com/awef/tr_awef_quick_reference.pdf

Features:

Indoor Unit:

• Weatherproof electrical control box with compressor contactor and fused control circuit
• Welded-hermetic compressor
• High efficiency enhanced tube and fin condenser design
• Pre-formed piping
• Quiet fan motor operation
• SmartSpeed EC Fan Motor Technology standard on models using chassis 1 and 2 (See our Product Data and Specifications for full details (PDF))
• Energy efficient PSC condenser fan motor on models using chassis 3 (See our Product Data and Specifications for full details (PDF))
• Electrical control panel away from air flow stream
• Wide-open front design, spring latches and handle on 5Hp MT & HT or larger
• Unit leak tested and shipped with helium holding charge
• Painted cabinet
• Receiver with fusible plug and liquid shut off valve
• Suction service valve
• Copper tubing secured with cushion clamps
• QuickVac Evacuation and Refrigerant Recovery Valves
• Fixed high and low pressure control

Outdoor Unit: All Standard Features of Indoor Unit, Plus:

• Painted weather-resistant housing with removable hood
• Flooded head pressure control (non adjustable)
• Crankcase heater

Available Options:

• Sealed suction filter
• Suction accumulator
• Suction accumulator with boil-out coil
• Heated and insulated receiver
• Sealed liquid line filter drier and sight glass
• Liquid line solenoid valve with 230-volt coil (shipped loose)
• Compressor circuit breaker
• Compressor time delay relay
• Variable speed EC motors as head pressure control (see Bulletin T40-HPC-AG for details)
• SmartSpeed Fan Motor Technology on models using chassis 3 (See our Product Data and Specifications for full details (PDF))
• Pump down toggle switch
• Electric defrost kit with mechanical time clock and contactors, as required
• Hoffman variable fan speed control
• Lockout control circuit relay (for liquid solenoid valve)
• Disconnect switch (fused or non-fused)
• Electronic phase / voltage monitor
• Leg kit or air discharge hood

Application:

• High, Medium and Low Temperature Refrigeration applications.
• Indoor or Outdoor

Capacity:

• 1/2 to 5 HP for High/Medium, Extended Medium and Low Temperature Refrigeration applications.

Electrical:

• 208-230/3/60
• 460/3/60
• 208-230/1/60
• 575/3/60
• 220/1/50
• 200-220/3/50
• 115/1/60
• 380-400/3/50