R – Indoor Remote Condensing Units

Certification:

Features:

• Compatible with Low GWP Refrigerants
• Sturdy electrical control box with compressor contactor and fused control circuit
• Spring mounted, accessible semi-hermetic compressor
• Compressor cooling fan (low temp. modelsand air cooled compressors only) on L6 units
• Sealed liquid line filter drier and sight glass on 5.0 hp – up
• Copper tubing secured with Hydra-Zorb / Cush- A-Clamp
• Receiver with fusible plug or relief valve and liquid shut off valve
• Adjustable dual high / low pressure control
• CoreSenseTM on all applicable models
• Suction and discharge service valve
• Electronic liquid injection on L8 units

Available Options:

• Suction accumulator with or without heat exchanger
• Sealed or replaceable core suction filter with vibration eliminator
• Oil separator c/w oil return solenoid valve
• Over-sized receiver
• Receiver inlet valve
• Discharge vibration eliminator
• Sealed liquid line filter drier and sight glass
• Replaceable core liquid line filter drier and sight glass
• Liquid line solenoid valve with 115 and 230 volt coil (shipped loose)
• Ball valve (shipped loose)
• Two valve adjustable flooded head pressure control
• Flex hose on all controls
• Compressor circuit breaker
• Compressor time delay relay
• Pump down toggle switch
• Time clock (factory mounted and wired, or shipped loose)
• Defrost contactor with fuse block
• Evaporator fan contactor with fuse block
• Fused disconnect
• Phase / voltage monitor
• Compressor unloading

Application:

• High, medium and low temperature applications.

Capacity:

• Sizes range from 1/2 HP to 40 HP for high, medium and low temperature applications

Electrical:

• 208-230/1/60
• 208-230/3/60
• 460/3/60
• 575/3/60
• 200-220/1/50
• 200-220/3/50
• 380-400/3/50